RFID ir NFC kortelių dublikatorius ZX-08CD (veikia su dauguma kortelių)

T5577/EM4305 are all ID-125KHZ frequency, and the card is empty when leaving the factory, it can be read after writing, please be aware.

This product is not suitable for bank cards!

Cannot write electronic label stickers and electronic label cards(for example : NFC type Ntag213 Ntag215 Ntag216)

If the device cannot be connected, try to not put the battery when connecting to the computer

The software is Only for ISO1443A cards

This machine only supports 125khz, 250khz, 375khz, 500khz, 625khz, 750khz, 875khz, 1M, HID-125khz, 13.56mhz (ic mode) read and copy, supports most IC encryption card decryption (but not all), do not support cards with power supply.

1) HD 2.9-inch color screen
2) ID/IC full hand and voice broadcast (in English).
3) Support read write frequency: 125KHz, 250KHz, 500KHz, 375KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz (ISO1443A/B)
4) Support read: EM4100/EM4200, Mifare classic, UID cards, Ultralight, Ntag203, HID 1386/1326/1346.
5) Support cards write: HID 1386/1326/1346, T5577, EM4305, Mifare UID cards.
6) Digital key input number can be directly inputted.
7) 4 AAA batteries supply or use with USB power supply.
8) Small and portable.
9) Please note that it can crack most but not all encryption cards.

How to copy the RFID cards:

1. Press the "on/off "button.
2. Put the original 125khz cards on the back of the copier. The copier will be show the "Disclaimer" page. Press "ok"
3. Put the cards on the back side of the copier and press "scan"
4. The copier will scan and show the card number.
5. Put one writable T5577(125khz writable chip)/UID(13.56mhz writable chip) key on the back side of the copier and press "Write"

Encryption of 13.56Mhz cards:

When the 13.56mhz cards have encrypted, the attached software should be used.

Power up the  via USB cable Conneted Device to computer;
then the Device will be show the "Disclaimer"page,
NOT press any button on the Copier,
your computer will show a removeable disk,
open the disk,
there is the software,
please copy the software to your computer disk space,
Press the device's "OK" button to agree with the Disclaimer fistly,
open the software,
the device will connect the software successfully,
put your original cards on the back side of the Read/Write area,
then press the button "scan" to crack the passwords,
after 2 or 5 minutes,the passwords will be cracked successfully,
note : fail to decode also is the normal result,
then put one UID chip cards (13.56mhz writable type chip) in the read / write area,
then press"write"button,
that will be ok.

Please note that the decoding software has decoding function which may mistake as virus, don't worry, it's not virus. And the decoding result depend on many factors, the result can be success, also be fail.