Tik internetu

Raspberry Pico H RP2040 (su įlituotais sutvirtintais kontaktais)

d3791

Nauja prekė

Bazinė plokštė su programuojamu ARM šeimos mikrovaldikliu iš Raspberry. Tvirtas kontaktų laikiklis leidžia patogiai naudoti įstatant į breadboard ir kt. jungtis. Debug interfeisas išvestas į 3p JST-SH jungtį.

Smulkiau

Prekių kiekis mūsų sandėlyje: 15  

11,98€ su PVM


9,90€ be PVM

Charakteristikos

Nominali darbinė įtampa3,3V
Maitinimo įtampa1,8-5,5 V
Skaitmeninių įėjimų/išėjimų skaičius23
PWM išėjimų skaičius16
Analoginių įėjimų skaičius3
Flash atminties kiekis2 Mb
SRAM atminties kiekis264 Kb
Dažnisiki 133MHz
Jungties žingsnis2,54mm
Matmenys51 x 21 mm
USBPilnai parengta
Komunikacijų sąsajos2 x UART (serial); 2 x I2C; 2 x SPI
Pagrindinės funkcijos grandynasRP2040

Apie prekę

Raspberry Pi Pico has been designed to be a low cost yet flexible development platform for RP2040, with the following
key features:
• RP2040 microcontroller with 2MByte Flash
• Micro-USB B port for power and data (and for reprogramming the Flash)
• 40 pin 21x51 'DIP' style 1mm thick PCB with 0.1" through-hole pins also with edge castellations

Exposes 26 multi-function 3.3V General Purpose I/O (GPIO)

23 GPIO are digital-only and 3 are ADC capable

Can be surface mounted as a module
• 3-pin ARM Serial Wire Debug (SWD) port
• Simple yet highly flexible power supply architecture

Various options for easily powering the unit from micro-USB, external supplies or batteries
• High quality, low cost, high availability
• Comprehensive SDK, software examples and documentation
For full details of the RP2040 microcontroller please see the RP2040 Datasheet, however the headline features are:
• Dual-core cortex M0+ at up to 133MHz

On-chip PLL allows variable core frequency
• 264kByte multi-bank high performance SRAM
• External Quad-SPI Flash with eXecute In Place (XIP)
• High performance full-crossbar bus fabric
• On-board USB1.1 (device or host)
• 30 multi-function General Purpose IO (4 can be used for ADC)

1.8-3.3V IO Voltage (NOTE Pico IO voltage is fixed at 3.3V)
• 12-bit 500ksps Analogue to Digital Converter (ADC)
• Various digital peripherals

2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels

1 × Timer with 4 alarms, 1 × Real Time Counter
• 2 × Programmable IO (PIO) blocks, 8 state machines total

Flexible, user-programmable high-speed IO

Can emulate interfaces such as SD Card and VGA
Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and
decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the
left and right edge of the board. Four RP2040 IO are used for internal functions - driving an LED, on-board Switched Mode
Power Supply (SMPS) power control and sensing the system voltages.

Atsiliepimai

Šiuo metu klientų atsiliepimų nėra.

Parašyti atsiliepimą

Raspberry Pico H RP2040 (su įlituotais sutvirtintais kontaktais)

Raspberry Pico H RP2040 (su įlituotais sutvirtintais kontaktais)

Bazinė plokštė su programuojamu ARM šeimos mikrovaldikliu iš Raspberry. Tvirtas kontaktų laikiklis leidžia patogiai naudoti įstatant į breadboard ir kt. jungtis. Debug interfeisas išvestas į 3p JST-SH jungtį.

Priedai

30 kitos prekės toje pačioje kategorijoje:

Atsisiųsti